Daily maintenance of lawn mower
After the operation every day, the machine should be carried out daily maintenance, that is, shift technical maintenance, including: remove dust, weeds, oil and other dirt, a comprehensive cleaning of the machine;Check the oil level of the engine. The check steps are as follows: first, remove the lubricating oil inlet cover and dry the oil scale;Insert the oil gauge into the oil filler again, and then pull it out. Observe the oil level of the engine, and fill in the required lubricating oil according to the operation manual.Change the oil in strict accordance with the instructions, check the condition of the spark plug often, and clean the surface stains before storage if it is not used for a long time.
The working environment of forage grass harvesting is poor. Air filter should be cleaned 1-2 times a day according to the situation of the working site to keep the filter clean.Operation method is: first the empty filter clean appearance, unscrewed the screw, the intake of the clean air intake mouth sundry dust, air cleaner filter installed in the bottom of the filter, filter box is outside, unscrewed the fasteners, remove the filter, external dirt rub-up, then take a small amount of clean diesel, dip in with the brush clean diesel filter, filter box also wipe clean, add oil to the filter box, and then loaded on filter according to the order mount fasteners, tighten the screws.
Check and maintain the cutter, the cutter is also vulnerable parts, every day after the operation to check the status of the cutter, the cutter off, to see if there is any damage, when the knife is damaged, you can use the ordinary grindstone for grinding, blade damage is serious, should be replaced.Then reattach the blade to the cutting disc and tighten the screws.
Summary:
After the operation every day, the machine should be carried out daily maintenance, that is, shift technical maintenance, including: remove dust, weeds, oil and other dirt, a comprehensive cleaning of the machine;Check the oil level of the engine. The check steps are as follows: first, remove the lubricating oil inlet cover and dry the oil scale;Insert the oil gauge into the oil filler again, and then pull it out. Observe the oil level of the engine, and fill in the required lubricating oil according to the operation manual.Change the oil in strict accordance with the instructions, check the condition of the spark plug often, and clean the surface stains before storage if it is not used for a long time.
Release time:
2021-09-01
Other news
TAIZHOU JINGDE MECHANICAL AND ELECTRICAL TECHNOLOGY CO.,LTD
No.389, Xinwen road, xinqiao town, Luqiao, Taizhou, Zhejiang, ChinaZhejiang Province
©2024TAIZHOU JINGDE MECHANICAL AND ELECTRICAL TECHNOLOGY CO.,LTD